+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6216-2RS1/C3 · 80 × 140 × 26

Deep groove ball · 6216-2RS1/C3

radial — mediumaxial — low, on both sides
    Drawing of 6216-2RS1/C3: ⌀80 × ⌀140 × 26 mm6216-2RS1/C32RS1
    Fig. 1: 6216-2RS1/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6216-2RS1/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6216-2RS1/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 22 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    26 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    C3
    C
    72.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 80 × 140 × 26 from other brands

    23 products
    Series illustration (not a photo of this item): 6216-2RS1/C3
    You are viewingSKF 6216-2RS1/C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 62166216open, no protection, normal clearanceCT80 × 140 × 2645 pcs€6.21
    • Series illustration (not a photo of this item): 62166216open, no protection, normal clearanceNTE80 × 140 × 2649 pcs€9.18
    • Series illustration (not a photo of this item): 62166216open, no protection, normal clearanceno brand80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): 62166216open, no protection, normal clearanceFAG80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): 62166216open, no protection, normal clearanceKG80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): 6216 NR6216 NRopen, no protection, normal clearance, groove and snap ringNSK80 × 140 × 26available to orderon request
    • Drawing: 6216/C3VL02416216/C3VL0241open, no protection, VL0241SKF80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): 6216 NR6216 NRopen, no protection, normal clearance, groove and snap ringSKF80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): 6216 P56216 P5open, no protection, normal clearance, precision class P5SLF80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): 6216 ZZ6216 ZZmetal shields on both sides, normal clearanceCT80 × 140 × 26326 pcs€6.46
    02

    Often bought with this

    seal 80×140

    1 product
    • Seal 80×140JULU 080-140-13 TCWhy it fits: Oil seal 80×140: shaft 80 and housing bore 140, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 140d 80B 26
    d×D×Bsize 80 × 140 × 26mm
    Cdynamic 72.8kN

    Deep groove ball bearing 6216-2RS C3, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet