+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €5.13 per piece.
6216 · 80 × 140 × 26

Deep groove ball · 6216

radial — mediumaxial — low, on both sides
    Drawing of 6216: ⌀80 × ⌀140 × 26 mm6216
    Fig. 1: 6216, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6216

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6216

    €6.21per piece incl. VAT
    In stock: 45 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 18 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    26 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    72.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    55 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.4 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 80 × 140 × 26 from other brands

    23 products
    Series illustration (not a photo of this item): 6216
    You are viewingCT 6216
    €6.21baseline for the price comparison

    Everything the number specifies matches: series 62, 80 × 140 × 26 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 62166216This bearingCT80 × 140 × 2645 pcs€6.21you are here
    • Series illustration (not a photo of this item): 62166216NTE80 × 140 × 2649 pcs€9.18+€2.97
    • Series illustration (not a photo of this item): 62166216no brand80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): 62166216FAG80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): 62166216KG80 × 140 × 26available to orderon request

    Under the price: the difference from the price of this bearing (€6.21).
    02

    Often bought with this

    seal 80×140

    1 product
    • Seal 80×140JULU 080-140-13 TCWhy it fits: Oil seal 80×140: shaft 80 and housing bore 140, the same as the bearing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 140d 80B 26
    d×D×Bsize 80 × 140 × 26mm
    Cdynamic 72.8kN
    C0static 55kN
    mweight 1.4kg

    Deep groove ball bearing 6216. Under GOST the same bearing is designated 216.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 216?

    It is the same bearing under GOST 3189-89: 216 corresponds to the ISO base 6216. Size 80 × 140 × 26 mm, a full equivalent of 6216.

    Will 6216 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet