+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6216 · 80 × 140 × 26

Deep groove ball · 6216

radial — mediumaxial — low, on both sides
    Drawing of 6216: ⌀80 × ⌀140 × 26 mm6216
    Fig. 1: 6216, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6216

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6216

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 18 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    26 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 80 × 140 × 26 from other brands

    23 products
    Series illustration (not a photo of this item): 6216
    You are viewingFAG 6216

    Everything the number specifies matches: series 62, 80 × 140 × 26 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

    • Series illustration (not a photo of this item): 62166216This bearingFAG80 × 140 × 26available to orderon requestyou are here
    • Series illustration (not a photo of this item): 62166216CT80 × 140 × 2645 pcs€6.21
    • Series illustration (not a photo of this item): 62166216NTE80 × 140 × 2649 pcs€9.18
    • Series illustration (not a photo of this item): 62166216no brand80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): 62166216KG80 × 140 × 26available to orderon request
    02

    Often bought with this

    seal 80×140

    1 product
    • Seal 80×140JULU 080-140-13 TCWhy it fits: Oil seal 80×140: shaft 80 and housing bore 140, the same as the bearing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 140d 80B 26
    d×D×Bsize 80 × 140 × 26mm

    Deep groove ball bearing 6216. Under GOST the same bearing is designated 216.

    Frequently asked questions

    What is 216?

    It is the same bearing under GOST 3189-89: 216 corresponds to the ISO base 6216. Size 80 × 140 × 26 mm, a full equivalent of 6216.

    Will 6216 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet