+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6216 NR · 80 × 140 × 26

Deep groove ball · 6216 NR

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6216 NR: ⌀80 × ⌀140 × 26 mm⌀140⌀80266216 NR
    Fig. 1: 6216 NR, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6216 NR

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6216 NR

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 21 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    26 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 80 × 140 × 26 from other brands

    23 products
    Series illustration (not a photo of this item): 6216 NR
    You are viewingSKF 6216 NR

    Everything the number specifies matches: series 62, 80 × 140 × 26 mm, open, no protection, NR, normal clearance, special design. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6216 NR6216 NRThis bearingSKF80 × 140 × 26available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6216 NR6216 NRNSK80 × 140 × 26available to orderon request
    02

    Often bought with this

    seal 80×140

    1 product
    • Seal 80×140JULU 080-140-13 TCWhy it fits: Oil seal 80×140: shaft 80 and housing bore 140, the same as the bearing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 140d 80B 26
    d×D×Bsize 80 × 140 × 26mm

    Deep groove ball bearing 6216. Under GOST the same bearing is designated 216.

    Frequently asked questions

    What is 216?

    It is the same bearing under GOST 3189-89: 216 corresponds to the ISO base 6216. Size 80 × 140 × 26 mm, a full equivalent of 6216.

    Will 6216 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet