+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NUP 315 E: ⌀75 × ⌀160 × 37 mm⌀160⌀7537NUP 315 E
Fig. 1: NUP 315 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NUP 315 E

Load: radial high; axial low, on both sidesCylindrical roller NUP

Bearing URB NUP 315 E

€78.98per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 25 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
37 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
3.45 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 75 × 160 × 37 from other brands

26 products
Photo: NUP 315 E
You are viewingURB NUP 315 E
€78.98baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller N, 75 × 160 × 37 mmN315J PQJ, PQ: not decodedNTE75 × 160 × 3710 pcs€25.50−€53.48Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 75 × 160 × 37 mmNJ315J PQJ, PQ: not decodedNTE75 × 160 × 3710 pcs€25.50−€53.48Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 75 × 160 × 37 mmNU315J PQJ, PQ: not decodedNTE75 × 160 × 3710 pcs€25.50−€53.48Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 75 × 160 × 37 mmNJ 315different designCT75 × 160 × 37available to order€14.18−€64.80Request a quote
  • Photo: NU 315NU 315different designGPZ75 × 160 × 37available to order€34.20−€44.78Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 75 × 160 × 37 mmNU 315different designCT75 × 160 × 37available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 75 × 160 × 37 mmN 315different designCT75 × 160 × 37available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller, 75 × 160 × 37 mmNF315different designCT75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU 315 ENU 315 Edifferent designCT75 × 160 × 37available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 75 × 160 × 37 mmN315EME, MDYZV75 × 160 × 37available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€78.98).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 75 × 160 × 37mm
mweight 3.45kg

Cylindrical roller NUP bearing NUP 315 E.

M: URB data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 315 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet