+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NU 315: ⌀75 × ⌀160 × 37 mm⌀160⌀7537NU 315
Fig. 1: NU 315, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 315

Load: radial high; no axial loadCylindrical roller NU

Bearing CT Malaysia NU 315

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
8 exact, 17 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
37 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
280 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
265 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
01

Equivalents

the same size 75 × 160 × 37 from other brands

26 products
Cross-section drawing to size: Cylindrical roller NU, 75 × 160 × 37 mm
You are viewingCT NU 315

Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Cylindrical roller NU, 75 × 160 × 37 mmNU 315This bearingCT75 × 160 × 37available to orderon requestyou are here
  • Photo: NU 315NU 315GPZ75 × 160 × 37available to order€34.20Request a quote
  • Series illustration (not a photo of this item): NU 315 ENU 315 ECT75 × 160 × 37available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 75 × 160 × 37 mmNU 315 E M1FAG75 × 160 × 37available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 75 × 160 × 37 mmNU315ET *5NSK75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU315ENU315ENTE75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU 315 ECJNU 315 ECJSKF75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU 315 ECPNU 315 ECPSKF75 × 160 × 37available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 75 × 160 × 37mm
Cdynamic 280kN
C0static 265kN

Cylindrical roller NU bearing NU 315.

C, C₀: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 315 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet