+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NF315: ⌀75 × ⌀160 × 37 mm⌀160⌀7537NF315
Fig. 1: NF315, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NF315

Load: radial high; no axial loadCylindrical roller

Bearing CT NF315

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 25 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
37 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 75 × 160 × 37 from other brands

26 products
Cross-section drawing to size: Cylindrical roller, 75 × 160 × 37 mm
You are viewingCT NF315

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller N, 75 × 160 × 37 mmN315J PQPQ: not decodedNTE75 × 160 × 3710 pcs€25.50Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 75 × 160 × 37 mmNJ315J PQPQ: not decodedNTE75 × 160 × 3710 pcs€25.50Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 75 × 160 × 37 mmNU315J PQPQ: not decodedNTE75 × 160 × 3710 pcs€25.50Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 75 × 160 × 37 mmNJ 315different designCT75 × 160 × 37available to order€14.18Request a quote
  • Photo: NU 315NU 315different designGPZ75 × 160 × 37available to order€34.20Request a quote
  • Photo: NUP 315 ENUP 315 Edifferent designURB75 × 160 × 37available to order€78.98Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 75 × 160 × 37 mmNU 315different designCT75 × 160 × 37available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 75 × 160 × 37 mmN 315different designCT75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU 315 ENU 315 Edifferent designCT75 × 160 × 37available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 75 × 160 × 37 mmN315EMdifferent designDYZV75 × 160 × 37available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 75 × 160 × 37mm

Cylindrical roller bearing NF315.

Frequently asked questions

Will 315 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet