+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Drawing of NU 315: ⌀75 × ⌀160 × 37 mm⌀160⌀7537NU 315
Fig. 1: NU 315, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 315

Load: radial high; no axial loadCylindrical roller NU

Bearing GPZ NU 315

€34.20per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
OEM number
75 RU 03
Equivalents
8 exact, 17 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
37 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
3.3 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 75 × 160 × 37 from other brands

26 products
Photo: NU 315
You are viewingGPZ NU 315
€34.20baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the GPZ catalogue.

  • Photo: NU 315NU 315This bearingGPZ75 × 160 × 37available to order€34.20you are here
  • Cross-section drawing to size: Cylindrical roller NU, 75 × 160 × 37 mmNU 315CT75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU 315 ENU 315 ECT75 × 160 × 37available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 75 × 160 × 37 mmNU 315 E M1FAG75 × 160 × 37available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 75 × 160 × 37 mmNU315ET *5NSK75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU315ENU315ENTE75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU 315 ECJNU 315 ECJSKF75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU 315 ECPNU 315 ECPSKF75 × 160 × 37available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€34.20).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 75 × 160 × 37mm
mweight 3.3kg

Cylindrical roller NU bearing NU 315.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 315 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet