+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
ZEN
1616 2RS · 80 × 170 × 58

Deep groove ball · 1616 2RS

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 1616 2RS: ⌀80 × ⌀170 × 58 mm⌀170⌀80581616 2RS2RS
    Fig. 1: 1616 2RS, simplified drawing per ISO 8826-1; GOST number = ISO 2316, dimensions from the GOST↔ISO table CX p.764. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1616 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing ZEN 1616 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 8 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    170 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    58 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 80 × 170 × 58 from other brands

    10 products
    Cross-section drawing to size: Deep groove ball, 80 × 170 × 58 mm
    You are viewingZEN 1616 2RS

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 23162316open, no protectionCT80 × 170 × 581 pcs€25.14
    • Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm2316 Mopen, no protection, MCT80 × 170 × 58available to orderon request
    • Series illustration (not a photo of this item): 23162316open, no protectionCX80 × 170 × 58available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm2316 Mopen, no protection, MFAG80 × 170 × 58available to orderon request
    • Series illustration (not a photo of this item): 23162316open, no protectionSKF80 × 170 × 58available to orderon request
    • Series illustration (not a photo of this item): 2316 K2316 Kopen, no protection, 1:12 tapered boreSKF80 × 170 × 58available to orderon request
    • Series illustration (not a photo of this item): 2316 K/C32316 K/C3open, no protection, clearance C3, 1:12 tapered boreSKF80 × 170 × 58available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm2316 Mopen, no protection, different cageSKF80 × 170 × 58available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 170d 80B 58
    d×D×Bsize 80 × 170 × 58mm

    Deep groove ball bearing 1616-2RS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet