+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2316 · 80 × 170 × 58

Self-aligning ball · 2316

radial — mediumaxial — low, on both sides
    Drawing of 2316: ⌀80 × ⌀170 × 58 mm⌀170⌀80582316
    Fig. 1: 2316, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2316

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2316

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    3 exact, 6 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    170 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    58 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    135 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 80 × 170 × 58 from other brands

    10 products
    Series illustration (not a photo of this item): 2316
    You are viewingSKF 2316

    Everything the number specifies matches: series 23, 80 × 170 × 58 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 23162316This bearingSKF80 × 170 × 58available to orderon requestyou are here
    • Series illustration (not a photo of this item): 23162316CT80 × 170 × 581 pcs€25.14
    • Series illustration (not a photo of this item): 23162316CX80 × 170 × 58available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 170 × 58mm
    Cdynamic 135kN

    Self-aligning ball bearing 2316. Under GOST the same bearing is designated 1616.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1616?

    It is the same bearing under GOST 3189-89: 1616 corresponds to the ISO base 2316. Size 80 × 170 × 58 mm, a full equivalent of 2316.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet