+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2316 K · 80 × 170 × 58

Self-aligning ball · 2316 K

radial — mediumaxial — low, on both sides
    Drawing of 2316 K: ⌀80 × ⌀170 × 58 mm⌀170⌀80582316 K
    Fig. 1: 2316 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2316 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2316 K

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 9 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    170 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    58 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    135 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 80 × 170 × 58 from other brands

    10 products
    Series illustration (not a photo of this item): 2316 K
    You are viewingSKF 2316 K

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 23162316standard designCT80 × 170 × 581 pcs€25.14
    • Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm2316 MMCT80 × 170 × 58available to orderon request
    • Series illustration (not a photo of this item): 23162316standard designCX80 × 170 × 58available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm2316 MMFAG80 × 170 × 58available to orderon request
    • Cross-section drawing to size: Deep groove ball, 80 × 170 × 58 mm1616 DCTNTG18DCTNTG18: not decodedNICE80 × 170 × 58available to orderon request
    • Series illustration (not a photo of this item): 23162316standard designSKF80 × 170 × 58available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm2316 Mdifferent cageSKF80 × 170 × 58available to orderon request
    • Series illustration (not a photo of this item): 2316 K/C32316 K/C3clearance C3SKF80 × 170 × 58available to orderon request
    • Cross-section drawing to size: Deep groove ball, 80 × 170 × 58 mm1616 2RScontact seals on both sides, standard designZEN80 × 170 × 58available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 170 × 58mm
    Cdynamic 135kN

    Self-aligning ball bearing 2316 K.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 2316 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet