+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NU 2312 ECP · 60 × 130 × 46

Cylindrical roller · NU 2312 ECP

radial — high
    Drawing of NU 2312 ECP: ⌀60 × ⌀130 × 46 mm⌀130⌀6046NU 2312 ECP
    Fig. 1: NU 2312 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 2312 ECP

    Load: radial high; no axial loadCylindrical roller NU

    Bearing SKF NU 2312 ECP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 17 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    46 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    260 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 60 × 130 × 46 from other brands

    18 products
    Series illustration (not a photo of this item): NU 2312 ECP
    You are viewingSKF NU 2312 ECP

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NU 2312 ENU 2312 EECT60 × 130 × 4619 pcs€14.59
    • Series illustration (not a photo of this item): N 2312N 2312different designCT60 × 130 × 4639 pcs€17.05
    • Series illustration (not a photo of this item): NJ 2312NJ 2312different designCT60 × 130 × 46110 pcs€17.09
    • Series illustration (not a photo of this item): NJ2312J PQNJ2312J PQJ, PQ: not decodedNTE60 × 130 × 466 pcs€30.15
    • Photo: NUP 2312 ENUP 2312 EEZ&S60 × 130 × 46available to order€31.40
    • Photo: NJ 2312 ENJ 2312 EEZ&S60 × 130 × 46available to order€44.32
    • Cross-section drawing to size: Cylindrical roller NJ, 60 × 130 × 46 mmNJ2312+HJ2312HJ2312: not decodedCT60 × 130 × 46available to orderon request
    • Series illustration (not a photo of this item): NJ2312-E-XL-M1A-QP51-C4NJ2312-E-XL-M1A-QP51-C4clearance C4, E, M1A, XL, QP51: not decodedFAG60 × 130 × ?available to orderon request
    • Series illustration (not a photo of this item): NU2312-E-XL-M1NU2312-E-XL-M1E, M1, XLFAG60 × 130 × 46available to orderon request
    • Series illustration (not a photo of this item): N 2312N 2312different designKG60 × 130 × 46available to orderon request
    02

    Often bought with this

    shaft snap ring Ø60

    1 product
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 130 × 46mm
    Cdynamic 260kN

    Cylindrical roller NU bearing NU 2312 ECP.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 2312 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet