+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €12.06 per piece.
NU 2312 E · 60 × 130 × 46

Cylindrical roller · NU 2312 E

radial — high
    Drawing of NU 2312 E: ⌀60 × ⌀130 × 46 mm⌀130⌀6046NU 2312 E
    Fig. 1: NU 2312 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 2312 E

    Load: radial high; no axial loadCylindrical roller NU

    Bearing CT NU 2312 E

    €14.59per piece incl. VAT
    In stock: 19 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 17 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    46 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    260 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 60 × 130 × 46 from other brands

    18 products
    Series illustration (not a photo of this item): NU 2312 E
    You are viewingCT NU 2312 E
    €14.59baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): N 2312N 2312different designCT60 × 130 × 4639 pcs€17.05+€2.46
    • Series illustration (not a photo of this item): NJ 2312NJ 2312different designCT60 × 130 × 46110 pcs€17.09+€2.50
    • Series illustration (not a photo of this item): NJ2312J PQNJ2312J PQJ, PQ: not decodedNTE60 × 130 × 466 pcs€30.15+€15.56
    • Photo: NUP 2312 ENUP 2312 Edifferent designZ&S60 × 130 × 46available to order€31.40+€16.81
    • Photo: NJ 2312 ENJ 2312 Edifferent designZ&S60 × 130 × 46available to order€44.32+€29.73
    • Cross-section drawing to size: Cylindrical roller NJ, 60 × 130 × 46 mmNJ2312+HJ2312HJ2312: not decodedCT60 × 130 × 46available to orderon request
    • Series illustration (not a photo of this item): NJ2312-E-XL-M1A-QP51-C4NJ2312-E-XL-M1A-QP51-C4clearance C4, E, M1A, XL, QP51: not decodedFAG60 × 130 × ?available to orderon request
    • Series illustration (not a photo of this item): NU2312-E-XL-M1NU2312-E-XL-M1E, M1, XLFAG60 × 130 × 46available to orderon request
    • Series illustration (not a photo of this item): N 2312N 2312different designKG60 × 130 × 46available to orderon request
    • Series illustration (not a photo of this item): NU 2312 WNU 2312 WWNSK60 × 130 × 46available to orderon request

    Under the price: the difference from the price of this bearing (€14.59).
    02

    Often bought with this

    shaft snap ring Ø60

    1 product
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 130 × 46mm
    Cdynamic 260kN

    Cylindrical roller NU bearing NU 2312 E.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 2312 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet