+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €36.63 per piece.
NJ 2312 E · 60 × 130 × 46

Cylindrical roller · NJ 2312 E

radial — highaxial — low, on one side
    Drawing of NJ 2312 E: ⌀60 × ⌀130 × 46 mm⌀130⌀6046NJ 2312 E
    Fig. 1: NJ 2312 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
    Bearing Z&S NJ 2312 E — photo 1
    Bearing Z&S NJ 2312 E — photo 2
    Bearing Z&S NJ 2312 E — photo 3
    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing Z&S NJ 2312 E

    €44.32per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    OEM number
    60 RJ 23
    Equivalents
    2 exact, 14 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    46 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    2.83 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 60 × 130 × 46 from other brands

    18 products
    Photo: NJ 2312 E
    You are viewingZ&S NJ 2312 E
    €44.32baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the Z&S catalogue.

    • Photo: NJ 2312 ENJ 2312 EThis bearingZ&S60 × 130 × 46available to order€44.32you are here
    • Series illustration (not a photo of this item): NJ 2312 ENJ 2312 ENTE60 × 130 × 46available to orderon request

    Under the price: the difference from the price of this bearing (€44.32).
    02

    Often bought with this

    shaft snap ring Ø60

    1 product
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 130 × 46mm
    mweight 2.83kg

    Cylindrical roller NJ bearing NJ 2312 E.

    M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 2312 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet