+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
3214 A · 70 × 125 × 39.7

Angular contact ball · 3214 A

at an angle — medium, on both sides
    Drawing of 3214 A: ⌀70 × ⌀125 × 39.7 mm⌀125⌀7039.73214 A
    Fig. 1: 3214 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3214 A

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 3214 A

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 5 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    39.7 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    C
    88.4 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 70 × 125 × 39.7 from other brands

    6 products
    Series illustration (not a photo of this item): 3214 A
    You are viewingSKF 3214 A

    Same size, different design: the difference is written in the row.

    • Photo: 3214 2RS3214 2RScontact seals on both sides, standard designZ&S70 × 125 × 39.7available to order€38.44
    • Series illustration (not a photo of this item): 3214 2RS3214 2RScontact seals on both sides, standard designCRAFT70 × 125 × 39.7available to orderon request
    • Series illustration (not a photo of this item): 3214 2RS3214 2RScontact seals on both sides, standard designINA70 × 125 × 39.7available to orderon request
    • Series illustration (not a photo of this item): 32143214standard designNTE70 × 125 × 39.7available to orderon request
    • Series illustration (not a photo of this item): 3214 A/C33214 A/C3clearance C3SKF70 × 125 × 39.7available to orderon request
    02

    Often bought with this

    seal 70×125, shaft snap ring Ø70, bore snap ring Ø125

    3 products
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing
      €0.8782 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 125d 70B 39.7
    d×D×Bsize 70 × 125 × 39.7mm
    Cdynamic 88.4kN

    Angular contact ball bearing 3214 A.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 3214 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet