+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
3214-2RS · 70 × 125 × 39.7

Angular contact ball · 3214 2RS

at an angle — medium, on both sides
    Drawing of 3214 2RS: ⌀70 × ⌀125 × 39.7 mm⌀125⌀7039.73214 2RS2RS
    Fig. 1: 3214 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3214-2RS

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing INA 3214-2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 3 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    39.7 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    01

    Equivalents

    the same size 70 × 125 × 39.7 from other brands

    6 products
    Series illustration (not a photo of this item): 3214 2RS
    You are viewingINA 3214-2RS

    Everything the number specifies matches: series 32, 70 × 125 × 39.7 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the INA catalogue.

    • Series illustration (not a photo of this item): 3214 2RS3214 2RSThis bearingINA70 × 125 × 39.7available to orderon requestyou are here
    • Photo: 3214 2RS3214 2RSZ&S70 × 125 × 39.7available to order€38.44
    • Series illustration (not a photo of this item): 3214 2RS3214 2RSCRAFT70 × 125 × 39.7available to orderon request
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø125, seal 70×125

    3 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.8782 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 125d 70B 39.7
    d×D×Bsize 70 × 125 × 39.7mm

    Angular contact ball bearing 3214-2RS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet