+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €31.77 per piece.
3214 2RS · 70 × 125 × 39.7

Angular contact ball · 3214 2RS

at an angle — medium, on both sides
    Drawing of 3214 2RS: ⌀70 × ⌀125 × 39.7 mm⌀125⌀7039.73214 2RS2RS
    Fig. 1: 3214 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
    Bearing Z&S 3214 2RS — photo 1
    Bearing Z&S 3214 2RS — photo 2
    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing Z&S 3214 2RS

    €38.44per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 3 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    39.7 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    m
    1.57 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 70 × 125 × 39.7 from other brands

    6 products
    Photo: 3214 2RS
    You are viewingZ&S 3214 2RS
    €38.44baseline for the price comparison

    Everything the number specifies matches: series 32, 70 × 125 × 39.7 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the Z&S catalogue.

    • Photo: 3214 2RS3214 2RSThis bearingZ&S70 × 125 × 39.7available to order€38.44you are here
    • Series illustration (not a photo of this item): 3214 2RS3214 2RSCRAFT70 × 125 × 39.7available to orderon request
    • Series illustration (not a photo of this item): 3214 2RS3214 2RSINA70 × 125 × 39.7available to orderon request

    Under the price: the difference from the price of this bearing (€38.44).
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø125, seal 70×125

    3 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.8782 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 125d 70B 39.7
    d×D×Bsize 70 × 125 × 39.7mm
    mweight 1.57kg

    Angular contact ball bearing 3214-2RS, design 2RS: contact seals on both sides.

    M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet