+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
3211 A 2 RS1/MT 33 · 55 × 100

Angular contact ball · 3211 A 2 RS1/MT 33 · simplified: width not specified

at an angle — medium, on both sides
    Drawing of 3211 A 2 RS1/MT 33: ⌀55 × ⌀100 mm⌀100⌀553211 A 2 RS1/MT 332RS1
    Fig. 1: 3211 A 2 RS1/MT 33, end view and section; internal parts simplified per ISO 8826-1; width not specified — outline drawn to the proportions of the type. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3211 A 2 RS1/MT 33

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 3211 A 2 RS1/MT 33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 0 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    Seal
    2RS1contact seals on both sides
    C
    60 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 55 × 100 from other brands

    9 products
    Series illustration (not a photo of this item): 3211 A 2 RS1/MT 33
    You are viewingSKF 3211 A 2 RS1/MT 33

    Not enough data for a firm conclusion: what is missing is written in the row.

    • Series illustration (not a photo of this item): 3211 2RS3211 2RSMT, 33: not decodedCT55 × 100 × 33.360 pcs€7.84
    • Series illustration (not a photo of this item): 32113211MT, 33: not decodedno brand55 × 100 × 33.3available to orderon request
    • Series illustration (not a photo of this item): 3211 2RS3211 2RSMT, 33: not decodedno brand55 × 100 × 33.3available to orderon request
    • Series illustration (not a photo of this item): 3211 2RS ATN93211 2RS ATN9MT, 33: not decodedISB55 × 100 × 33.3available to orderon request
    • Series illustration (not a photo of this item): 3211 J3211 JMT, 33: not decodedNSK55 × 100 × 33.3available to orderon request
    • Series illustration (not a photo of this item): 3211B-2ZRTNG N AR3N53211B-2ZRTNG N AR3N5R3: not decodedNSK55 × 100 × ?available to orderon request
    • Series illustration (not a photo of this item): 3211 ATN93211 ATN9MT, 33: not decodedSKF55 × 100 × 33.3available to orderon request
    • Photo: 3211 2RS3211 2RSMT, 33: not decodedZ&S55 × 100 × 33.3out of stockon request
    02

    Often bought with this

    shaft snap ring Ø55, bore snap ring Ø100, seal 55×100

    4 products
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 55×100JULU 055-100-10 TCWhy it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.98630 pcs
    • Seal 55×100SUPTEX 55x100x13Why it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €4.57available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 55 × 100mm
    Cdynamic 60kN

    Angular contact ball bearing 3211 A 2 RS1/MT 33, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet