+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
ISB
3211 2RS ATN9 · 55 × 100 × 33.3

Angular contact ball · 3211 2RS ATN9

at an angle — medium, on both sides
    Drawing of 3211 2RS ATN9: ⌀55 × ⌀100 × 33.3 mm⌀100⌀5533.33211 2RS ATN92RS
    Fig. 1: 3211 2RS ATN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3211 2RS ATN9

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing ISB 3211 2RS ATN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 7 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    33.3 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    01

    Equivalents

    the same size 55 × 100 × 33.3 from other brands

    9 products
    Series illustration (not a photo of this item): 3211 2RS ATN9
    You are viewingISB 3211 2RS ATN9

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 32113211open, no protection, standard designno brand55 × 100 × 33.3available to orderon request
    • Series illustration (not a photo of this item): 3211 J3211 Jopen, no protection, JNSK55 × 100 × 33.3available to orderon request
    • Series illustration (not a photo of this item): 3211 ATN93211 ATN9open, no protection, different cage, ASKF55 × 100 × 33.3available to orderon request
    • Series illustration (not a photo of this item): 3211 2RS3211 2RSstandard designCT55 × 100 × 33.360 pcs€7.84
    • Series illustration (not a photo of this item): 3211 2RS3211 2RSstandard designno brand55 × 100 × 33.3available to orderon request
    • Photo: 3211 2RS3211 2RSstandard designZ&S55 × 100 × 33.3out of stockon request
    • Series illustration (not a photo of this item): 3211B-2ZRTNG N AR3N53211B-2ZRTNG N AR3N5metal shields on both sides, 5, A, B, TNG, groove for a snap ring, R3: not decodedNSK55 × 100 × ?available to orderon request
    02

    Often bought with this

    shaft snap ring Ø55, bore snap ring Ø100, seal 55×100

    4 products
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 55×100JULU 055-100-10 TCWhy it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.98630 pcs
    • Seal 55×100SUPTEX 55x100x13Why it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €4.57available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 100d 55B 33.3
    d×D×Bsize 55 × 100 × 33.3mm

    Angular contact ball bearing 3211 A-2RS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet