+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €6.48 per piece.
3211 2RS · 55 × 100 × 33.3

Angular contact ball · 3211 2RS

at an angle — medium, on both sides
    Drawing of 3211 2RS: ⌀55 × ⌀100 × 33.3 mm⌀100⌀5533.33211 2RS2RS
    Fig. 1: 3211 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3211 2RS

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing CT 3211 2RS

    €7.84per piece incl. VAT
    In stock: 60 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 6 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    33.3 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    C
    60 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    47.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.05 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 55 × 100 × 33.3 from other brands

    9 products
    Series illustration (not a photo of this item): 3211 2RS
    You are viewingCT 3211 2RS
    €7.84baseline for the price comparison

    Everything the number specifies matches: series 32, 55 × 100 × 33.3 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 3211 2RS3211 2RSThis bearingCT55 × 100 × 33.360 pcs€7.84you are here
    • Series illustration (not a photo of this item): 3211 2RS3211 2RSno brand55 × 100 × 33.3available to orderon request
    • Photo: 3211 2RS3211 2RSZ&S55 × 100 × 33.3out of stockon request

    Under the price: the difference from the price of this bearing (€7.84).
    02

    Often bought with this

    shaft snap ring Ø55, bore snap ring Ø100, seal 55×100

    4 products
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 55×100JULU 055-100-10 TCWhy it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.98630 pcs
    • Seal 55×100SUPTEX 55x100x13Why it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €4.57available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 100d 55B 33.3
    d×D×Bsize 55 × 100 × 33.3mm
    Cdynamic 60kN
    C0static 47.5kN
    mweight 1.05kg

    Angular contact ball bearing 3211-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet