+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2216 ETN9 · 80 × 140 × 33

Self-aligning ball · 2216 ETN9

radial — mediumaxial — low, on both sides
    Drawing of 2216 ETN9: ⌀80 × ⌀140 × 33 mm⌀140⌀80332216 ETN9
    Fig. 1: 2216 ETN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2216 ETN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2216 ETN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 7 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    33 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    65 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 80 × 140 × 33 from other brands

    8 products
    Series illustration (not a photo of this item): 2216 ETN9
    You are viewingSKF 2216 ETN9

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 22162216standard designCT80 × 140 × 3316 pcs€10.27
    • Photo: 2216 K2216 K1:12 tapered boreZKL80 × 140 × 33available to order€41.48
    • Series illustration (not a photo of this item): 2216 TVH C32216 TVH C3clearance C3, TVHFAG80 × 140 × 33available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 80 × 140 × 33 mm2216 EKTN9different cage, E, 1:12 tapered boreSKF80 × 140 × 33available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 80 × 140 × 33 mm2216 EKTN9/C3clearance C3, different cage, E, 1:12 tapered boreSKF80 × 140 × 33available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 80 × 140 × 33 mm2216 K1:12 tapered boreZVL80 × 140 × 33available to orderon request
    • Series illustration (not a photo of this item): 2216 ETN9/C32216 ETN9/C3clearance C3SKF80 × 140 × 33available to orderon request
    02

    Often bought with this

    seal 80×140

    1 product
    • Seal 80×140JULU 080-140-13 TCWhy it fits: Oil seal 80×140: shaft 80 and housing bore 140, the same as the bearing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 140 × 33mm
    Cdynamic 65kN

    Self-aligning ball bearing 2216. Under GOST the same bearing is designated 1516.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1516?

    It is the same bearing under GOST 3189-89: 1516 corresponds to the ISO base 2216. Size 80 × 140 × 33 mm, a full equivalent of 2216.

    Will 2216 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet