+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2216 K · 80 × 140 × 33

Self-aligning ball · 2216 K

radial — mediumaxial — low, on both sides
    Drawing of 2216 K: ⌀80 × ⌀140 × 33 mm⌀140⌀80332216 K
    Fig. 1: 2216 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2216 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing ZVL 2216 K

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 6 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    33 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 80 × 140 × 33 from other brands

    8 products
    Cross-section drawing to size: Self-aligning ball, 80 × 140 × 33 mm
    You are viewingZVL 2216 K

    Everything the number specifies matches: series 22, 80 × 140 × 33 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the ZVL catalogue.

    • Cross-section drawing to size: Self-aligning ball, 80 × 140 × 33 mm2216 KThis bearingZVL80 × 140 × 33available to orderon requestyou are here
    • Photo: 2216 K2216 KZKL80 × 140 × 33available to order€41.48
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 140 × 33mm

    Self-aligning ball bearing 2216 K.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet