+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2216 EKTN9 · 80 × 140 × 33

Self-aligning ball · 2216 EKTN9

radial — mediumaxial — low, on both sides
    Drawing of 2216 EKTN9: ⌀80 × ⌀140 × 33 mm⌀140⌀80332216 EKTN9
    Fig. 1: 2216 EKTN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2216 EKTN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2216 EKTN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 5 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    33 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    65 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 80 × 140 × 33 from other brands

    8 products
    Cross-section drawing to size: Self-aligning ball, 80 × 140 × 33 mm
    You are viewingSKF 2216 EKTN9

    Everything the number specifies matches: series 22, 80 × 140 × 33 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the SKF catalogue.

    • Cross-section drawing to size: Self-aligning ball, 80 × 140 × 33 mm2216 EKTN9This bearingSKF80 × 140 × 33available to orderon requestyou are here
    • Photo: 2216 K2216 KZKL80 × 140 × 33available to order€41.48
    • Cross-section drawing to size: Self-aligning ball, 80 × 140 × 33 mm2216 KZVL80 × 140 × 33available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 140 × 33mm
    Cdynamic 65kN

    Self-aligning ball bearing 2216 K.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 2216 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet