+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2207 ETN9/C3 · 35 × 72 × 23

Self-aligning ball · 2207 ETN9/C3

radial — mediumaxial — low, on both sides
    Drawing of 2207 ETN9/C3: ⌀35 × ⌀72 × 23 mm⌀72⌀35232207 ETN9/C3
    Fig. 1: 2207 ETN9/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2207 ETN9/C3

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2207 ETN9/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 17 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    C
    30.7 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 35 × 72 × 23 from other brands

    18 products
    Series illustration (not a photo of this item): 2207 ETN9/C3
    You are viewingSKF 2207 ETN9/C3

    Same size, different design: the difference is written in the row.

    • Photo: 2207 E-2RS1TN92207 E-2RS1TN9contact seals on both sides, normal clearanceSKF35 × 72 × 2310 pcs€37.89
    • Series illustration (not a photo of this item): 2207 2RS2207 2RScontact seals on both sides, normal clearance, standard designCT35 × 72 × 23available to order€3.92
    • Photo: 2207 2RS2207 2RScontact seals on both sides, normal clearance, standard designZ&S35 × 72 × 23available to order€8.28
    • Series illustration (not a photo of this item): 2207 2RS2207 2RScontact seals on both sides, normal clearance, standard designno brand35 × 72 × 23available to orderon request
    • Series illustration (not a photo of this item): 2207 2RS2207 2RScontact seals on both sides, normal clearance, standard designCX35 × 72 × 23out of stockon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207-2RSTNG N AR3N5contact seals on both sides, TNG, groove for a snap ring, AR3N5: not decodedNSK35 × 72 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 K 2RSTNGcontact seals on both sides, normal clearance, TNG, 1:12 tapered boreNSK35 × 72 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 E-2RS1KTN9contact seals on both sides, normal clearance, different cage, E, 1:12 tapered boreSKF35 × 72 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 E-2RS1KTN9/C3contact seals on both sides, different cage, E, 1:12 tapered boreSKF35 × 72 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mmS 2207 2RScontact seals on both sides, S: not decodedZEN35 × 72 × 23available to orderon request
    02

    Often bought with this

    seal 35×72, shaft snap ring Ø35, bore snap ring Ø72

    6 products
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.502,454 pcs
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 72 × 23mm
    Cdynamic 30.7kN

    Self-aligning ball bearing 2207 C3.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet