+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €31.31 per piece.
2207 E-2RS1TN9 · 35 × 72 × 23

Self-aligning ball · 2207 E-2RS1TN9

radial — mediumaxial — low, on both sides
    Drawing of 2207 E-2RS1TN9: ⌀35 × ⌀72 × 23 mm⌀72⌀35232207 E-2RS1TN92RS1
    Fig. 1: 2207 E-2RS1TN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2207 E-2RS1TN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2207 E-2RS1TN9

    €37.89per piece incl. VAT
    In stock: 10 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 16 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    23 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    19 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    6 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 35 × 72 × 23 from other brands

    18 products
    Photo: 2207 E-2RS1TN9
    You are viewingSKF 2207 E-2RS1TN9
    €37.89baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 2207 2RS2207 2RSstandard designCT35 × 72 × 23available to order€3.92−€33.97
    • Photo: 2207 2RS2207 2RSstandard designZ&S35 × 72 × 23available to order€8.28−€29.61
    • Series illustration (not a photo of this item): 2207 2RS2207 2RSstandard designno brand35 × 72 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207K+H3071:12 tapered bore, H307: not decodedCT35 × 72 × 23available to orderon request
    • Series illustration (not a photo of this item): 2207 2RS2207 2RSstandard designCX35 × 72 × 23out of stockon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207-2RSTNG N AR3N5TNG, groove for a snap ring, AR3N5: not decodedNSK35 × 72 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 K 2RSTNGTNG, 1:12 tapered boreNSK35 × 72 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 E-2RS1KTN9different cage, E, 1:12 tapered boreSKF35 × 72 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 E-2RS1KTN9/C3clearance C3, different cage, E, 1:12 tapered boreSKF35 × 72 × 23available to orderon request
    • Series illustration (not a photo of this item): 22072207open, no protection, standard designCT35 × 72 × 23312 pcs€3.40−€34.49

    Under the price: the difference from the price of this bearing (€37.89).
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø72, seal 35×72

    6 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.502,454 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 72 × 23mm
    Cdynamic 19kN
    C0static 6kN

    Self-aligning ball bearing 2207-2RS, design 2RS1: contact seals on both sides.

    C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet