+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2207 E-2RS1KTN9 · 35 × 72 × 23

Self-aligning ball · 2207 E-2RS1KTN9

radial — mediumaxial — low, on both sides
    Drawing of 2207 E-2RS1KTN9: ⌀35 × ⌀72 × 23 mm⌀72⌀35232207 E-2RS1KTN92RS1
    Fig. 1: 2207 E-2RS1KTN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2207 E-2RS1KTN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2207 E-2RS1KTN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 17 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 35 × 72 × 23 from other brands

    18 products
    Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm
    You are viewingSKF 2207 E-2RS1KTN9

    Same size, different design: the difference is written in the row.

    • Photo: 2207 E-2RS1TN92207 E-2RS1TN9different cage, ESKF35 × 72 × 2310 pcs€37.89
    • Series illustration (not a photo of this item): 2207 2RS2207 2RSstandard designCT35 × 72 × 23available to order€3.92
    • Photo: 2207 2RS2207 2RSstandard designZ&S35 × 72 × 23available to order€8.28
    • Series illustration (not a photo of this item): 2207 2RS2207 2RSstandard designno brand35 × 72 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207K+H3071:12 tapered bore, H307: not decodedCT35 × 72 × 23available to orderon request
    • Series illustration (not a photo of this item): 2207 2RS2207 2RSstandard designCX35 × 72 × 23out of stockon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207-2RSTNG N AR3N5TNG, groove for a snap ring, AR3N5: not decodedNSK35 × 72 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 K 2RSTNGTNG, 1:12 tapered boreNSK35 × 72 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mmS 2207 2RSS: not decodedZEN35 × 72 × 23available to orderon request
    • Series illustration (not a photo of this item): 22072207open, no protection, standard designCT35 × 72 × 23312 pcs€3.40
    02

    Often bought with this

    adapter sleeve H307, lock nut M35×1.5, lock washer MB07, bore snap ring Ø72, seal 30×72

    8 products
    • Adapter sleeve H307CT H 307Why it fits: H307 for 2207 K: 1:12 taper, bore 35 for shaft 30 (Koyo, p. 65)
      €1.4986 pcs
    • Adapter sleeve H307FAG H 307Why it fits: H307 for 2207 K: 1:12 taper, bore 35 for shaft 30 (Koyo, p. 65)
      Price to be confirmedavailable to order
    • Lock nut M35×1.5KM 07Why it fits: KM07 is the nut for sleeve H307: thread M35×1.5
      €0.82available to order
    • Lock nut M35×1.5Z&S KM 7Why it fits: KM07 is the nut for sleeve H307: thread M35×1.5
      €0.98available to order
    • Lock washer MB07CT MB 07Why it fits: MB07 locks the KM07 nut (ISO 2982-2)
      €0.106,655 pcs
    • Lock washer MB07NEU MB 7Why it fits: MB07 locks the KM07 nut (ISO 2982-2)
      €0.17available to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Seal 30×72JULU 030-72-10 TCWhy it fits: Oil seal 30×72: sleeve shaft 30, housing bore for the bearing 72; SN/SNL housings have their own seals, so check against the housing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.392,205 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 72 × 23mm

    Self-aligning ball bearing 2207 K-2RS, design 2RS1: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 2207 2RS1 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet