+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1315 K/C3 · 75 × 160 × 37

Self-aligning ball · 1315 K/C3

radial — mediumaxial — low, on both sides
    Drawing of 1315 K/C3: ⌀75 × ⌀160 × 37 mm⌀160⌀75371315 K/C3
    Fig. 1: 1315 K/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1315 K/C3

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 1315 K/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 9 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    37 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    C
    79.3 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 75 × 160 × 37 from other brands

    10 products
    Series illustration (not a photo of this item): 1315 K/C3
    You are viewingSKF 1315 K/C3

    Same size, different design: the difference is written in the row.

    • Photo: 1315 K+H1315 K+HH: not decodedGPZ75 × 160 × 37available to order€46.45
    • Photo: 13151315normal clearance, standard designZKL75 × 160 × 37available to order€74.66
    • Cross-section drawing to size: Self-aligning ball, 75 × 160 × 37 mm1315K+H315H315: not decodedCT75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 13151315normal clearance, standard designNSK75 × 160 × 37available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 75 × 160 × 37 mm1315K+H315H315: not decodedNTE75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 13151315normal clearance, standard designSKF75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 1315/C31315/C3standard designSKF75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 13151315normal clearance, standard designNTN/SNR75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 1315 K1315 Knormal clearanceZVL75 × 160 × 37available to orderon request
    02

    Often bought with this

    adapter sleeve H315, lock nut M75×2, lock washer MB15

    6 products
    • Adapter sleeve H315SKF H 315Why it fits: H315 for 1315 K: 1:12 taper, bore 75 for shaft 65 (Koyo, p. 65)
      €37.4517 pcs
    • Adapter sleeve H315CT H 315Why it fits: H315 for 1315 K: 1:12 taper, bore 75 for shaft 65 (Koyo, p. 65)
      €7.18available to order
    • Lock nut M75×2CT KM 15 SILVERWhy it fits: KM15 is the nut for sleeve H315: thread M75×2
      €2.11128 pcs
    • Lock nut M75×2FAG KM 15Why it fits: KM15 is the nut for sleeve H315: thread M75×2
      Price to be confirmedavailable to order
    • Lock washer MB15CT MB 15Why it fits: MB15 locks the KM15 nut (ISO 2982-2)
      €0.31345 pcs
    • Lock washer MB15MB 15Why it fits: MB15 locks the KM15 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 75 × 160 × 37mm
    Cdynamic 79.3kN

    Self-aligning ball bearing 1315 K C3.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet