+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €61.70 per piece.
1315 · 75 × 160 × 37

Self-aligning ball · 1315

radial — mediumaxial — low, on both sides
    Drawing of 1315: ⌀75 × ⌀160 × 37 mm⌀160⌀75371315
    Fig. 1: 1315, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1315

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing ZKL 1315

    €74.66per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    4 exact, 6 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    37 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    3.55 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 75 × 160 × 37 from other brands

    10 products
    Photo: 1315
    You are viewingZKL 1315
    €74.66baseline for the price comparison

    Everything the number specifies matches: series 13, 75 × 160 × 37 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the ZKL catalogue.

    • Photo: 13151315This bearingZKL75 × 160 × 37available to order€74.66you are here
    • Series illustration (not a photo of this item): 13151315NSK75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 13151315SKF75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 13151315NTN/SNR75 × 160 × 37available to orderon request

    Under the price: the difference from the price of this bearing (€74.66).
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 75 × 160 × 37mm
    mweight 3.55kg

    Self-aligning ball bearing 1315. Under GOST the same bearing is designated 1315.

    M: ZKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1315?

    It is the same bearing under GOST 3189-89: 1315 corresponds to the ISO base 1315. Size 75 × 160 × 37 mm, a full equivalent of 1315.

    Will 1315 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet