+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1312 ETN9 · 60 × 130 × 31

Self-aligning ball · 1312 ETN9

radial — mediumaxial — low, on both sides
    Drawing of 1312 ETN9: ⌀60 × ⌀130 × 31 mm⌀130⌀60311312 ETN9
    Fig. 1: 1312 ETN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1312 ETN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 1312 ETN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 8 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    31 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    58.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 60 × 130 × 31 from other brands

    9 products
    Series illustration (not a photo of this item): 1312 ETN9
    You are viewingSKF 1312 ETN9

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 1312 K1312 K1:12 tapered boreCT60 × 130 × 313 pcs€9.62
    • Series illustration (not a photo of this item): 13121312standard designCT60 × 130 × 31123 pcs€9.90
    • Cross-section drawing to size: Self-aligning ball, 60 × 130 × 31 mm1312K+H3121:12 tapered bore, H312: not decodedCT60 × 130 × 316 pcs€10.60
    • Photo: 13121312standard designKG60 × 130 × 31available to order€28.21
    • Photo: 1312 K1312 K1:12 tapered boreGPZ60 × 130 × 31available to order€31.53
    • Series illustration (not a photo of this item): 13121312standard designGPZ60 × 130 × 31out of stockon request
    • Series illustration (not a photo of this item): 13121312standard designKoyo60 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): 1312 EKTN91312 EKTN9different cage, E, 1:12 tapered boreSKF60 × 130 × 31available to orderon request
    02

    Often bought with this

    shaft snap ring Ø60

    1 product
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 130 × 31mm
    Cdynamic 58.5kN

    Self-aligning ball bearing 1312. Under GOST the same bearing is designated 1312.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1312?

    It is the same bearing under GOST 3189-89: 1312 corresponds to the ISO base 1312. Size 60 × 130 × 31 mm, a full equivalent of 1312.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet