+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1312 EKTN9 · 60 × 130 × 31

Self-aligning ball · 1312 EKTN9

radial — mediumaxial — low, on both sides
    Drawing of 1312 EKTN9: ⌀60 × ⌀130 × 31 mm⌀130⌀60311312 EKTN9
    Fig. 1: 1312 EKTN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1312 EKTN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 1312 EKTN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 5 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    31 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    58.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 60 × 130 × 31 from other brands

    9 products
    Series illustration (not a photo of this item): 1312 EKTN9
    You are viewingSKF 1312 EKTN9

    Everything the number specifies matches: series 13, 60 × 130 × 31 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 1312 EKTN91312 EKTN9This bearingSKF60 × 130 × 31available to orderon requestyou are here
    • Series illustration (not a photo of this item): 1312 K1312 KCT60 × 130 × 313 pcs€9.62
    • Photo: 1312 K1312 KGPZ60 × 130 × 31available to order€31.53
    02

    Often bought with this

    adapter sleeve H312, lock nut M60×2, lock washer MB12

    6 products
    • Adapter sleeve H312CT H 312Why it fits: H312 for 1312 K: 1:12 taper, bore 60 for shaft 55 (Koyo, p. 65)
      €2.53available to order
    • Adapter sleeve H312SKF H 312Why it fits: H312 for 1312 K: 1:12 taper, bore 60 for shaft 55 (Koyo, p. 65)
      €20.75available to order
    • Lock nut M60×2CT KM 12 SILVERWhy it fits: KM12 is the nut for sleeve H312: thread M60×2
      €1.31410 pcs
    • Lock nut M60×2Z&S KM 12Why it fits: KM12 is the nut for sleeve H312: thread M60×2
      €1.96available to order
    • Lock washer MB12CT MB 12Why it fits: MB12 locks the KM12 nut (ISO 2982-2)
      €0.22202 pcs
    • Lock washer MB12MB 12Why it fits: MB12 locks the KM12 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 130 × 31mm
    Cdynamic 58.5kN

    Self-aligning ball bearing 1312 K.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet