+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €8.18 per piece.
1312 · 60 × 130 × 31

Self-aligning ball · 1312

radial — mediumaxial — low, on both sides
    Drawing of 1312: ⌀60 × ⌀130 × 31 mm⌀130⌀60311312
    Fig. 1: 1312, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1312

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing CT 1312

    €9.90per piece incl. VAT
    In stock: 123 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    4 exact, 5 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    31 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    58.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    22 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.95 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 60 × 130 × 31 from other brands

    9 products
    Series illustration (not a photo of this item): 1312
    You are viewingCT 1312
    €9.90baseline for the price comparison

    Everything the number specifies matches: series 13, 60 × 130 × 31 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 13121312This bearingCT60 × 130 × 31123 pcs€9.90you are here
    • Photo: 13121312KG60 × 130 × 31available to order€28.21+€18.31
    • Series illustration (not a photo of this item): 13121312GPZ60 × 130 × 31out of stockon request
    • Series illustration (not a photo of this item): 13121312Koyo60 × 130 × 31available to orderon request

    Under the price: the difference from the price of this bearing (€9.90).
    02

    Often bought with this

    shaft snap ring Ø60

    1 product
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 130 × 31mm
    Cdynamic 58.5kN
    C0static 22kN
    mweight 1.95kg

    Self-aligning ball bearing 1312. Under GOST the same bearing is designated 1312.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1312?

    It is the same bearing under GOST 3189-89: 1312 corresponds to the ISO base 1312. Size 60 × 130 × 31 mm, a full equivalent of 1312.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet