+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6407 C3 · 35 × 100 × 25

Deep groove ball · 6407 C3

radial — mediumaxial — low, on both sides
    Drawing of 6407 C3: ⌀35 × ⌀100 × 25 mm6407 C3
    Fig. 1: 6407 C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6407 C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6407 C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 7 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    25 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    C
    55.3 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    31 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.95 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 35 × 100 × 25 from other brands

    8 products
    Series illustration (not a photo of this item): 6407 C3
    You are viewingNTE 6407 C3

    Same size, different design: the difference is written in the row.

    • Cross-section drawing to size: Deep groove ball, 35 × 100 × 25 mm6407 Nnormal clearance, groove for a snap ringCT35 × 100 × 25available to orderon request
    • Cross-section drawing to size: Deep groove ball, 35 × 100 × 25 mm6407 NRnormal clearance, groove and snap ringNKE35 × 100 × 25available to orderon request
    • Drawing: 6407 56407 5normal clearance, 5NSK35 × 100 × 25available to orderon request
    • Series illustration (not a photo of this item): 64076407normal clearanceCT35 × 100 × 256 pcs€4.53
    • Series illustration (not a photo of this item): 64076407normal clearanceKG35 × 100 × 25available to orderon request
    • Drawing: 6407 2RS6407 2RScontact seals on both sides, normal clearanceCT35 × 100 × 25available to order€3.84
    • Drawing: 6407 2RS6407 2RScontact seals on both sides, normal clearanceIBB35 × 100 × 25available to orderon request
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø100

    3 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. T-150-05-09-25, KhTZ-181 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 100d 35B 25
    d×D×Bsize 35 × 100 × 25mm
    Cdynamic 55.3kN
    C0static 31kN
    mweight 0.95kg

    Deep groove ball bearing 6407 C3.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet