+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6407 5 · 35 × 100 × 25

Deep groove ball · 6407 5

radial — mediumaxial — low, on both sides
    Drawing of 6407 5: ⌀35 × ⌀100 × 25 mm6407 5
    Fig. 1: 6407 5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6407 5

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 6407 5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 7 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    25 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 35 × 100 × 25 from other brands

    8 products
    Drawing: 6407 5
    You are viewingNSK 6407 5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 64076407standard designCT35 × 100 × 256 pcs€4.53
    • Cross-section drawing to size: Deep groove ball, 35 × 100 × 25 mm6407 Ngroove for a snap ringCT35 × 100 × 25available to orderon request
    • Series illustration (not a photo of this item): 64076407standard designKG35 × 100 × 25available to orderon request
    • Cross-section drawing to size: Deep groove ball, 35 × 100 × 25 mm6407 NRgroove and snap ringNKE35 × 100 × 25available to orderon request
    • Series illustration (not a photo of this item): 6407 C36407 C3clearance C3, standard designNTE35 × 100 × 25available to orderon request
    • Drawing: 6407 2RS6407 2RScontact seals on both sides, standard designCT35 × 100 × 25available to order€3.84
    • Drawing: 6407 2RS6407 2RScontact seals on both sides, standard designIBB35 × 100 × 25available to orderon request
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø100

    3 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. T-150-05-09-25, KhTZ-181 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours has 5

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    Number in the manufacturer’s catalogue: by GOST (407) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 100d 35B 25
    d×D×Bsize 35 × 100 × 25mm

    Deep groove ball bearing 6407. Under GOST the same bearing is designated 407.

    Frequently asked questions

    What is 407?

    It is the same bearing under GOST 3189-89: 407 corresponds to the ISO base 6407. Size 35 × 100 × 25 mm, a full equivalent of 6407.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet