+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
IBB
6407 2RS · 35 × 100 × 25

Deep groove ball · 6407 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6407 2RS: ⌀35 × ⌀100 × 25 mm6407 2RS2RS
    Fig. 1: 6407 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6407 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing IBB 6407 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 6 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    25 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 35 × 100 × 25 from other brands

    8 products
    Drawing: 6407 2RS
    You are viewingIBB 6407 2RS

    Everything the number specifies matches: series 64, 35 × 100 × 25 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the IBB catalogue.

    • Drawing: 6407 2RS6407 2RSThis bearingIBB35 × 100 × 25available to orderon requestyou are here
    • Drawing: 6407 2RS6407 2RSCT35 × 100 × 25available to order€3.84
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø100

    3 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. T-150-05-09-25, KhTZ-181 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    Number in the manufacturer’s catalogue: by GOST (180407) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 100d 35B 25
    d×D×Bsize 35 × 100 × 25mm

    Deep groove ball bearing 6407-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180407.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180407?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0407 corresponds to the ISO base 6407. Size 35 × 100 × 25 mm, a full equivalent of 6407-2RS.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet