+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6315-M-C3 · 75 × 160 × 37

Deep groove ball · 6315 M-C3

radial — mediumaxial — low, on both sides
    Drawing of 6315 M-C3: ⌀75 × ⌀160 × 37 mm6315 M-C3
    Fig. 1: 6315 M-C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6315-M-C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6315-M-C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 22 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    37 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    01

    Equivalents

    the same size 75 × 160 × 37 from other brands

    23 products
    Drawing: 6315 M-C3
    You are viewingFAG 6315-M-C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 63156315normal clearance, standard designCT75 × 160 × 3710 pcs€8.48
    • Series illustration (not a photo of this item): 63156315normal clearance, standard designNTE75 × 160 × 3728 pcs€18.62
    • Photo: 6315/C36315/C3standard designSKF75 × 160 × 37available to order€70.53
    • Series illustration (not a photo of this item): 6315N6315Nnormal clearance, groove for a snap ringCT75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 63156315normal clearance, standard designDYZV75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 63156315normal clearance, standard designKG75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 6315 MC36315 MC3clearance MC3, standard designNSK75 × 160 × 37available to orderon request
    • Type diagram, no dimensions: ball6315 M/C3S0VQ335M, C3S0VQ335: not decodedSKF75 × 160 × ?available to orderon request
    • Series illustration (not a photo of this item): 6315 2RS6315 2RScontact seals on both sides, normal clearance, standard designCT75 × 160 × 37157 pcs€12.74
    • Photo: 6315 2RS6315 2RScontact seals on both sides, normal clearance, standard designZ&S75 × 160 × 37available to order€23.07
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 1 assembly · 2 pcs per machine

      ours has clearance C3; the machine takes normal (CN); ours has M

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 1 assembly · 2 pcs per machine

      ours has clearance C3; the machine takes normal (CN); ours has M

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 160d 75B 37
    d×D×Bsize 75 × 160 × 37mm

    Deep groove ball bearing 6315 C3.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet