+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €7.01 per piece.
6315 · 75 × 160 × 37

Deep groove ball · 6315

radial — mediumaxial — low, on both sides
    Drawing of 6315: ⌀75 × ⌀160 × 37 mm6315
    Fig. 1: 6315, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6315

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6315

    €8.48per piece incl. VAT
    In stock: 10 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    4 exact, 18 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    37 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    119 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    76.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    3 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 75 × 160 × 37 from other brands

    23 products
    Series illustration (not a photo of this item): 6315
    You are viewingCT 6315
    €8.48baseline for the price comparison

    Everything the number specifies matches: series 63, 75 × 160 × 37 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 63156315This bearingCT75 × 160 × 3710 pcs€8.48you are here
    • Series illustration (not a photo of this item): 63156315NTE75 × 160 × 3728 pcs€18.62+€10.14
    • Series illustration (not a photo of this item): 63156315DYZV75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 63156315KG75 × 160 × 37available to orderon request

    Under the price: the difference from the price of this bearing (€8.48).
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus exactly this number 1 assembly · 2 pcs per machine

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus-80Kh/​80Kh.1/​100Kh Belarus exactly this number 1 assembly · 2 pcs per machine

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    Number in the manufacturer’s catalogue: by GOST (315) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 160d 75B 37
    d×D×Bsize 75 × 160 × 37mm
    Cdynamic 119kN
    C0static 76.5kN
    mweight 3kg

    Deep groove ball bearing 6315. Under GOST the same bearing is designated 315.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 315?

    It is the same bearing under GOST 3189-89: 315 corresponds to the ISO base 6315. Size 75 × 160 × 37 mm, a full equivalent of 6315.

    Will 6315 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet