+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6315 MC3 · 75 × 160 × 37

Deep groove ball · 6315 MC3

radial — mediumaxial — low, on both sides
    Drawing of 6315 MC3: ⌀75 × ⌀160 × 37 mm6315 MC3
    Fig. 1: 6315 MC3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6315 MC3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 6315 MC3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 21 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    37 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    MC3
    01

    Equivalents

    the same size 75 × 160 × 37 from other brands

    23 products
    Series illustration (not a photo of this item): 6315 MC3
    You are viewingNSK 6315 MC3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6315 2RS6315 2RScontact seals on both sides, normal clearanceCT75 × 160 × 37157 pcs€12.74
    • Photo: 6315 2RS6315 2RScontact seals on both sides, normal clearanceZ&S75 × 160 × 37available to order€23.07
    • Series illustration (not a photo of this item): 6315-2RS6315-2RScontact seals on both sides, normal clearanceDYZV75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 6315-2RS/C36315-2RS/C3contact seals on both sides, clearance C3DYZV75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 6315 2RS6315 2RScontact seals on both sides, normal clearanceKG75 × 160 × 37available to orderon request
    • Drawing: 6315DDUCM AS2S56315DDUCM AS2S5contact seals on both sides, clearance CM, 5, AS2SNSK75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 6315-2RS16315-2RS1contact seals on both sides, normal clearanceSKF75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 6315 2RS1/C36315 2RS1/C3contact seals on both sides, clearance C3SKF75 × 160 × 37available to orderon request
    • Photo: 6315 ZZ6315 ZZmetal shields on both sides, normal clearanceZ&S75 × 160 × 37available to order€29.37
    • Series illustration (not a photo of this item): 6315 ZZ6315 ZZmetal shields on both sides, normal clearanceNTE75 × 160 × 37available to orderon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 1 assembly · 2 pcs per machine

      ours has clearance MC3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 1 assembly · 2 pcs per machine

      ours has clearance MC3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    Number in the manufacturer’s catalogue: by GOST (315) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 160d 75B 37
    d×D×Bsize 75 × 160 × 37mm

    Deep groove ball bearing 6315. Under GOST the same bearing is designated 315.

    Frequently asked questions

    What is 315?

    It is the same bearing under GOST 3189-89: 315 corresponds to the ISO base 6315. Size 75 × 160 × 37 mm, a full equivalent of 6315.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet