+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6215-M-C3 · 75 × 130 × 25

Deep groove ball · 6215 M-C3

radial — mediumaxial — low, on both sides
    Drawing of 6215 M-C3: ⌀75 × ⌀130 × 25 mm6215 M-C3
    Fig. 1: 6215 M-C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6215-M-C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6215-M-C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 26 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    25 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    01

    Equivalents

    the same size 75 × 130 × 25 from other brands

    28 products
    Drawing: 6215 M-C3
    You are viewingFAG 6215-M-C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6215 2RS6215 2RScontact seals on both sides, normal clearance, standard designCT75 × 130 × 2542 pcs€6.56
    • Photo: 6215 2RS6215 2RScontact seals on both sides, normal clearance, standard designZ&S75 × 130 × 25available to order€16.29
    • Photo: 6215-2RS1/C36215-2RS1/C3contact seals on both sides, standard designSKF75 × 130 × 25available to order€45.11
    • Series illustration (not a photo of this item): 6215-2RS16215-2RS1contact seals on both sides, normal clearance, standard designSKF75 × 130 × 25available to order€45.12
    • Series illustration (not a photo of this item): 6215 2RS6215 2RScontact seals on both sides, normal clearance, standard designno brand75 × 130 × 25available to orderon request
    • Series illustration (not a photo of this item): 6215 2RS6215 2RScontact seals on both sides, normal clearance, standard designKG75 × 130 × 25available to orderon request
    • Photo: 6215 2RS6215 2RScontact seals on both sides, normal clearance, standard designKLT75 × 130 × 25out of stockon request
    • Drawing: 6215DDUCM AS2S56215DDUCM AS2S5contact seals on both sides, clearance CM, 5, AS2SNSK75 × 130 × 25available to orderon request
    • Series illustration (not a photo of this item): 6215 2RS C36215 2RS C3contact seals on both sides, standard designNTE75 × 130 × 25available to orderon request
    • Cross-section drawing to size: Deep groove ball, 75 × 130 × 25 mmS 6215 2RScontact seals on both sides, S: not decodedZEN75 × 130 × 25available to orderon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    10 machines2 makesby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); the machine has snap ring groove (N); ours does not; ours has M

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 1523/​1523V/​1523.3 Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); the machine has snap ring groove (N); ours does not; ours has M

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    3. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); the machine has snap ring groove (N); ours does not; ours has M

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    4. KhTZ-16131, KhTZ-16331 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours has clearance C3; the machine takes normal (CN); ours has M

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    5. KhTZ-17021, KhTZ-17221 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours has clearance C3; the machine takes normal (CN); ours has M

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 130d 75B 25
    d×D×Bsize 75 × 130 × 25mm

    Deep groove ball bearing 6215 C3.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet