+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6215 2RS C3 · 75 × 130 × 25

Deep groove ball · 6215 2RS C3

radial — mediumaxial — low, on both sides
    Drawing of 6215 2RS C3: ⌀75 × ⌀130 × 25 mm6215 2RS C32RS
    Fig. 1: 6215 2RS C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6215 2RS C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6215 2RS C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 26 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    25 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    C3
    C
    68.9 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    49 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.2 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 75 × 130 × 25 from other brands

    28 products
    Series illustration (not a photo of this item): 6215 2RS C3
    You are viewingNTE 6215 2RS C3

    Everything the number specifies matches: series 62, 75 × 130 × 25 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 6215 2RS C36215 2RS C3This bearingNTE75 × 130 × 25available to orderon requestyou are here
    • Photo: 6215-2RS1/C36215-2RS1/C3SKF75 × 130 × 25available to order€45.11
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    10 machines2 makesby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 1523/​1523V/​1523.3 Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    3. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    4. KhTZ-16131, KhTZ-16331 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    5. KhTZ-17021, KhTZ-17221 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 130d 75B 25
    d×D×Bsize 75 × 130 × 25mm
    Cdynamic 68.9kN
    C0static 49kN
    mweight 1.2kg

    Deep groove ball bearing 6215-2RS C3, design 2RS: contact seals on both sides.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet