+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6215 2RS · 75 × 130 × 25

Deep groove ball · 6215 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6215 2RS: ⌀75 × ⌀130 × 25 mm6215 2RS2RS
    Fig. 1: 6215 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6215 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 6215 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    6 exact, 21 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    25 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 75 × 130 × 25 from other brands

    28 products
    Series illustration (not a photo of this item): 6215 2RS
    You are viewing6215 2RS

    Everything the number specifies matches: series 62, 75 × 130 × 25 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 6215 2RS6215 2RSThis bearingno brand75 × 130 × 25available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6215 2RS6215 2RSCT75 × 130 × 2542 pcs€6.56
    • Photo: 6215 2RS6215 2RSZ&S75 × 130 × 25available to order€16.29
    • Series illustration (not a photo of this item): 6215-2RS16215-2RS1SKF75 × 130 × 25available to order€45.12
    • Series illustration (not a photo of this item): 6215 2RS6215 2RSKG75 × 130 × 25available to orderon request
    • Photo: 6215 2RS6215 2RSKLT75 × 130 × 25out of stockon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    10 machines2 makesby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 1523/​1523V/​1523.3 Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    3. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    4. KhTZ-16131, KhTZ-16331 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    5. KhTZ-17021, KhTZ-17221 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    Number in the manufacturer’s catalogue: by GOST (180215) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 130d 75B 25
    d×D×Bsize 75 × 130 × 25mm

    Deep groove ball bearing 6215-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180215.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180215?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0215 corresponds to the ISO base 6215. Size 75 × 130 × 25 mm, a full equivalent of 6215-2RS.

    Will 6215 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet