+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
16006 A 2Z · 30 × 55

Deep groove ball · 16006 A 2Z · simplified: bore (cylindrical or K), not given in the designation; width not specified

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 16006 A 2Z: ⌀30 × ⌀55 mm⌀55⌀3016006 A 2Z2Z
    Fig. 1: 16006 A 2Z, simplified drawing per ISO 8826-1; width not specified — outline drawn to the proportions of the type. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16006 A 2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 16006 A 2Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 11 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    55 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    Seal
    2Zmetal shields on both sides
    01

    Equivalents

    the same size 30 × 55 from other brands

    15 products
    Type diagram, no dimensions: ball
    You are viewingFAG 16006 A 2Z

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 1600616006open, no protectionCT30 × 55 × 9available to order€0.87
    • Series illustration (not a photo of this item): 1600616006open, no protectionKG30 × 55 × 9available to orderon request
    • Series illustration (not a photo of this item): 1600616006open, no protectionNEU30 × 55 × 9out of stockon request
    • Series illustration (not a photo of this item): 1600616006open, no protectionNTE30 × 55 × 9available to orderon request
    • Series illustration (not a photo of this item): 1600616006open, no protectionSKF30 × 55 × 9available to orderon request
    • Drawing: 16006 2RS16006 2RScontact seals on both sidesCT30 × 55 × 9available to order€1.42
    • Drawing: 16006 2RS16006 2RScontact seals on both sidesno brand30 × 55 × 9available to orderon request
    • Drawing: SS 16006 2RSSS 16006 2RScontact seals on both sidesIBB30 × 55 × 9available to orderon request
    • Cross-section drawing to size: Deep groove ball, 30 × 55 × 9 mmS 16006 2RScontact seals on both sides, S: not decodedZEN30 × 55 × 9available to orderon request
    • Cross-section drawing to size: Deep groove ball, 30 × 55 × 9 mm16006CM D 5contact seal on one sideNSK30 × 55 × 9available to orderon request
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø55, seal 30×55

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø55CT SEG 55 W by 1000Why it fits: DIN 472 snap ring for a 55 bore: holds the outer ring in the housing
      €90.59available to order
    • Seal 30×55JULU 030-55-10 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.39870 pcs
    • Seal 30×55JULU 030-55-7 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.40180 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus-152 Belarus check the version 1 assembly · 1 pcs per machine

      the machine has S1; ours does not; ours: shields on both sides (ZZ); in the machine: open; not decoded: mark “K” in the machine catalogue, suffix of our number “A”

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 30 × 55mm

    Deep groove ball bearing 16006 A 2Z, design 2Z: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet