+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NEU
16006 · 30 × 55 × 9

Deep groove ball · 16006

radial — mediumaxial — low, on both sides
    Drawing of 16006: ⌀30 × ⌀55 × 9 mm16006
    Fig. 1: 16006, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16006

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NEU 16006

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 8 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    55 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    9 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.082 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 30 × 55 × 9 from other brands

    15 products
    Series illustration (not a photo of this item): 16006
    You are viewingNEU 16006

    Everything the number specifies matches: series 160, 30 × 55 × 9 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NEU catalogue.

    • Series illustration (not a photo of this item): 1600616006This bearingNEU30 × 55 × 9out of stockon requestyou are here
    • Series illustration (not a photo of this item): 1600616006CT30 × 55 × 9available to order€0.87
    • Series illustration (not a photo of this item): 1600616006KG30 × 55 × 9available to orderon request
    • Series illustration (not a photo of this item): 1600616006NTE30 × 55 × 9available to orderon request
    • Series illustration (not a photo of this item): 1600616006SKF30 × 55 × 9available to orderon request
    02

    Often bought with this

    seal 30×55, shaft snap ring Ø30, bore snap ring Ø55

    5 products
    • Seal 30×55JULU 030-55-10 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing
      €0.39870 pcs
    • Seal 30×55JULU 030-55-7 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing
      €0.40180 pcs
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø55CT SEG 55 W by 1000Why it fits: DIN 472 snap ring for a 55 bore: holds the outer ring in the housing
      €90.59available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus-152 Belarus check the version 1 assembly · 1 pcs per machine

      the machine has S1; ours does not; not decoded: mark “K” in the machine catalogue

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    Number in the manufacturer’s catalogue: by GOST (7000106) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 55d 30B 9
    d×D×Bsize 30 × 55 × 9mm
    mweight 0.082kg

    Deep groove ball bearing 16006. Under GOST the same bearing is designated 7000106.

    M: NEU data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 7000106?

    It is the same bearing under GOST 3189-89: 7000106 corresponds to the ISO base 16006. Size 30 × 55 × 9 mm, a full equivalent of 16006.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet