+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.17 per piece.
16006 2RS · 30 × 55 × 9

Deep groove ball · 16006 2RS

radial — mediumaxial — low, on both sides
    Drawing of 16006 2RS: ⌀30 × ⌀55 × 9 mm16006 2RS2RS
    Fig. 1: 16006 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16006 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 16006 2RS

    €1.42per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 11 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    55 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    9 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    11.9 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    7.35 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.085 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 30 × 55 × 9 from other brands

    15 products
    Drawing: 16006 2RS
    You are viewingCT 16006 2RS
    €1.42baseline for the price comparison

    Everything the number specifies matches: series 160, 30 × 55 × 9 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Drawing: 16006 2RS16006 2RSThis bearingCT30 × 55 × 9available to order€1.42you are here
    • Drawing: 16006 2RS16006 2RSno brand30 × 55 × 9available to orderon request

    Under the price: the difference from the price of this bearing (€1.42).
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø55, seal 30×55

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø55CT SEG 55 W by 1000Why it fits: DIN 472 snap ring for a 55 bore: holds the outer ring in the housing
      €90.59available to order
    • Seal 30×55JULU 030-55-10 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.39870 pcs
    • Seal 30×55JULU 030-55-7 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.40180 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus-152 Belarus check the version 1 assembly · 1 pcs per machine

      the machine has S1; ours does not; ours: seals on both sides (2RS); in the machine: open; not decoded: mark “K” in the machine catalogue

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 55d 30B 9
    d×D×Bsize 30 × 55 × 9mm
    Cdynamic 11.9kN
    C0static 7.35kN
    mweight 0.085kg

    Deep groove ball bearing 16006-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet