+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
€0.00
Grain header Veles

Grain headers · Veles

SKH sunflower headers

6 ± 0.02 mheader design working width over side dividers
2,150 ± 5%total weight, max.
Price on request In stock SKH 6 Header for harvesting sunflower · 6 m · 3 widths
In your request

The SKH headers are made for harvesting sunflower with a combine: working width from 6 to 11.2 m, drive by a cardan shaft from the combine PTO, working speed up to 12 km/h. The cutter bar is the finger-type Pro-Drive, with cutting height adjustable from 250 to 800 mm. Model weights run from 2,150 to 3,328 kg. For moving headers on public roads there are the SKHT trailers (two-axle, load capacity 4,500 kg, headers up to 9.5 m) and the VTZH trailers (single-axle, up to 4,500 kg, headers up to 6.5 m).

More

Model: SKH 6 Header for harvesting sunflower

Manufacturer: Veles

Class: machinery

Type: grain headers

Copy: 1 / 1

//About the machine

SKH6 Header for harvesting sunflower

Descr.

The SKH headers are made for harvesting sunflower with a combine: working width from 6 to 11.2 m, drive by a cardan shaft from the combine PTO, working speed up to 12 km/h. The cutter bar is the finger-type Pro-Drive, with cutting height adjustable from 250 to 800 mm. Model weights run from 2,150 to 3,328 kg. For moving headers on public roads there are the SKHT trailers (two-axle, load capacity 4,500 kg, headers up to 9.5 m) and the VTZH trailers (single-axle, up to 4,500 kg, headers up to 6.5 m).

Choose the widthprice, configuration and options are for the selected

SKH 6 Header for harvesting sunflower6 m—on request SKH 8.4 Header for harvesting sunflower8.4 m—on request SKH 11.2 Header for harvesting sunflower11.2 m—on request

Below are the options and parts for the selected model. The model range table compares every model and also switches the selection.

Doc · Agrodiler · machinery Veles · 2026 22 specs

//Technical specifications

data sheet
#ParameterValue
01
Model
SKH 6 Header for har­ves­ting sunflower
02
Type
Grain headers
03
Type
mounted
04
BHeader design working width over side dividers, m
6 ± 0.02
Working width BThe strip the machine works in one pass.
05
Work rate
matches the combine threshing capacity and does not limit it
06
Travel speed, working, max., km/⁠h
up to 12
07
Travel speed, tran­sport, max., km/⁠h
20
08
Drive
PTO shaft drive from the combine
09
Cutting height, adjus­tab­le, mm
250 ‒ 800
10
Dimen­sions, length, max., mm
2,845
11
Dimen­sions, width, max., mm
6,230
12
Dimen­sions, height, max., mm
1,065
13
Road clea­ran­ce, min., mm
300
14
Crop divider spacing (axial), mm
350
15
Gap between crop dividers, mm
27 ‒ 65
16
Crop divider length, mm
1,750
17
mTotal weight, max., kg
2,150 ± 5%
Weight mWeight of the machine without the tractor.
18
Cut­ter­bar, type
finger-type, with closed-type double steel fingers
19
Cut­ter­bar, knife drive
Pro-Drive Schu­mac­her
20
Cut­ter­bar, knife segment pitch, mm
76.2
21
Cut­ter­bar, knife stroke, mm
85
22
Cut­ter­bar, knife cycle rate, rpm
522
Manufacturer and Agrodiler catalogue data 22 reg.OK
Price on request In your request