+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
ZEN
Simplified drawing of the bearing per ISO 8826-1, dimensions of 1616 2RS: ⌀80 × ⌀170 × 58 mm⌀170⌀80581616 2RS2RS
Fig. 1: 1616 2RS, simplified drawing per ISO 8826-1; GOST number = ISO 2316, dimensions from the GOST↔ISO table CX p.764. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1616 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing ZEN 1616 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 8 approximate
d
80 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
170 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
58 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
Clearance
normal clearance
01

Equivalents

the same size 80 × 170 × 58 from other brands

10 products
Cross-section drawing to size: Deep groove ball, 80 × 170 × 58 mm
You are viewingZEN 1616 2RS

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 23162316open, no protectionCT80 × 170 × 581 pcs€19.94Request a quote
  • Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm2316 Mopen, no protection, MCT80 × 170 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 23162316open, no protectionCX80 × 170 × 58available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm2316 Mopen, no protection, MFAG80 × 170 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 23162316open, no protectionSKF80 × 170 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2316 K2316 Kopen, no protection, 1:12 tapered boreSKF80 × 170 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2316 K/C32316 K/C3open, no protection, clearance C3, 1:12 tapered boreSKF80 × 170 × 58available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm2316 Mopen, no protection, different cageSKF80 × 170 × 58available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 170d 80B 58
d×D×Bsize 80 × 170 × 58mm

Deep groove ball bearing 1616-2RS, design 2RS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet