+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2316 K/C3: ⌀80 × ⌀170 × 58 mm⌀170⌀80582316 K/C3
Fig. 1: 2316 K/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2316 K/C3

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2316 K/C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 9 approximate
d
80 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
170 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
58 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
C3
C
135 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 80 × 170 × 58 from other brands

10 products
Series illustration (not a photo of this item): 2316 K/C3
You are viewingSKF 2316 K/C3

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 23162316normal clearance, standard designCT80 × 170 × 581 pcs€19.94Request a quote
  • Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm2316 Mnormal clearance, MCT80 × 170 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 23162316normal clearance, standard designCX80 × 170 × 58available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm2316 Mnormal clearance, MFAG80 × 170 × 58available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 80 × 170 × 58 mm1616 DCTNTG18DCTNTG18: not decodedNICE80 × 170 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 23162316normal clearance, standard designSKF80 × 170 × 58available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm2316 Mnormal clearance, different cageSKF80 × 170 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2316 K2316 Knormal clearanceSKF80 × 170 × 58available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 80 × 170 × 58 mm1616 2RScontact seals on both sides, normal clearance, standard designZEN80 × 170 × 58available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 80 × 170 × 58mm
Cdynamic 135kN

Self-aligning ball bearing 2316 K C3.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet