+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2316 M: ⌀80 × ⌀170 × 58 mm⌀170⌀80582316 M
Fig. 1: 2316 M, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2316-M

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing FAG 2316-M

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 6 approximate
d
80 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
170 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
58 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 80 × 170 × 58 from other brands

10 products
Cross-section drawing to size: Self-aligning ball, 80 × 170 × 58 mm
You are viewingFAG 2316-M

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 23162316standard designCT80 × 170 × 581 pcs€19.94Request a quote
  • Series illustration (not a photo of this item): 23162316standard designCX80 × 170 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 23162316standard designSKF80 × 170 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2316 K2316 K1:12 tapered boreSKF80 × 170 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2316 K/C32316 K/C3clearance C3, 1:12 tapered boreSKF80 × 170 × 58available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 80 × 170 × 58 mm1616 2RScontact seals on both sides, standard designZEN80 × 170 × 58available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 80 × 170 × 58mm

Self-aligning ball bearing 2316. Under GOST the same bearing is designated 1616.

Frequently asked questions

What is 1616?

It is the same bearing under GOST 3189-89: 1616 corresponds to the ISO base 2316. Size 80 × 170 × 58 mm, a full equivalent of 2316.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet