+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NJ 212: ⌀60 × ⌀110 × 22 mm⌀110⌀6022NJ 212
Fig. 1: NJ 212, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
Bearing Z&S NJ 212 — photo 1
Bearing Z&S NJ 212 — photo 2
Bearing Z&S NJ 212 — photo 3
Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing Z&S NJ 212

€16.85per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
OEM number
60 RJ 02
Equivalents
12 exact, 23 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
22 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.83 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 60 × 110 × 22 from other brands

36 products
Photo: NJ 212
You are viewingZ&S NJ 212
€16.85baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the Z&S catalogue.

  • Photo: NJ 212NJ 212This bearingZ&S60 × 110 × 22available to order€16.85you are here
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 110 × 22 mmNJ 212 single boxCT60 × 110 × 22288 pcs€4.32−€12.53Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 110 × 22 mmNJ212CT60 × 110 × 22available to order€4.80−€12.05Request a quote
  • Series illustration (not a photo of this item): NJ 212 ENJ 212 EKG60 × 110 × 22available to order€7.13−€9.72Request a quote
  • Photo: NJ 212 ETNNJ 212 ETNTMB60 × 110 × 22available to order€13.34−€3.51Request a quote
  • Photo: NJ 212 ETVP2NJ 212 ETVP2FAG60 × 110 × 22available to order€69.10+€52.25Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 110 × 22 mmNJ 212GPZ60 × 110 × 22out of stockon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 110 × 22 mmNJ 212no brand60 × 110 × 22available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 110 × 22 mmNJ212ET *5NSK60 × 110 × 22available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 110 × 22 mmNJ212EW *5NSK60 × 110 × 22available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€16.85).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 110 × 22mm
mweight 0.83kg

Cylindrical roller NJ bearing NJ 212.

M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 212 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet