+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
KG
Drawing of NJ 212 E: ⌀60 × ⌀110 × 22 mm⌀110⌀6022NJ 212 E
Fig. 1: NJ 212 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 212 E

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing KG NJ 212 E

€7.13per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 30 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
22 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 60 × 110 × 22 from other brands

36 products
Series illustration (not a photo of this item): NJ 212 E
You are viewingKG NJ 212 E
€7.13baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NU, 60 × 110 × 22 mmNU 212different designCT60 × 110 × 224 pcs€5.54−€1.59Request a quote
  • Type diagram, no dimensions: rollerNF212J PQJ, PQ: not decodedNTE60 × 110 × ?10 pcs€9.04+€1.91Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 110 × 22 mmNJ212J PQJ, PQ: not decodedNTE60 × 110 × 2287 pcs€9.04+€1.91Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 60 × 110 × 22 mmNU212J PQJ, PQ: not decodedNTE60 × 110 × 2240 pcs€9.04+€1.91Request a quote
  • Photo: NJ 212 ETNNJ 212 ETNE, TNTMB60 × 110 × 22available to order€13.34+€6.21Request a quote
  • Photo: NU 212 KMNU 212 KMM, 1:12 tapered boreGPZ60 × 110 × 22available to order€34.56+€27.43Request a quote
  • Photo: NJ 212 ETVP2NJ 212 ETVP2E, TVP2FAG60 × 110 × 22available to order€69.10+€61.97Request a quote
  • Cross-section drawing to size: Cylindrical roller, 60 × 110 × 22 mmNF 212different designCT60 × 110 × 22available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller, 60 × 110 × 22 mmNF 212 Edifferent designCT60 × 110 × 22available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 60 × 110 × 22 mmNU 212 EP 6E, P, 6: not decodedDKF60 × 110 × 22out of stockon requestRequest a quote

Under the price: the difference from the price of this bearing (€7.13).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 110 × 22mm

Cylindrical roller NJ bearing NJ 212 E.

Frequently asked questions

Will 212 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet