+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
TMB
Drawing of NJ 212 ETN: ⌀60 × ⌀110 × 22 mm⌀110⌀6022NJ 212 ETN
Fig. 1: NJ 212 ETN, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 212 ETN

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing TMB NJ 212 ETN

€13.34per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
2 exact, 29 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
22 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.83 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 60 × 110 × 22 from other brands

36 products
Photo: NJ 212 ETN
You are viewingTMB NJ 212 ETN
€13.34baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the TMB catalogue.

  • Photo: NJ 212 ETNNJ 212 ETNThis bearingTMB60 × 110 × 22available to order€13.34you are here
  • Series illustration (not a photo of this item): NJ 212 ENJ 212 EKG60 × 110 × 22available to order€7.13−€6.21Request a quote

Under the price: the difference from the price of this bearing (€13.34).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 110 × 22mm
mweight 0.83kg

Cylindrical roller NJ bearing NJ 212 ETN.

M: TMB data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 212 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet